Get Pumped to Get Pumping

The Loaded Icarus was designed with your comfort in mind. It is composed of vertically laminated bamboo, cork and bamboo biscuits strategically placed to increase torsional rigidity. What you give to this board you get right back out of it.

This board was optimized for the maximum amount of energy transfer to the trucks. In layman's terms, carve and pump real hard and you'll gain speed.

For your comfort, this board is nice and low to the ground for increased stability and ease of pushing due to the drop-through mounting. This board features camber and a moderate amount of flex to reduce the feeling of bumps.

Designed for:
Cruising | Carving | Pushing | Pumping | Dancing

Complete With:

Complete w/ Kegels

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Kegel Wheels - 80mm | 80a | Orange
• Orangatang Nipple Bushings - 85a | Orange
• Dragon Bearings - 8mm

Complete w/ Durians

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Durian Wheels - 75mm | 83a | Purple
• Dragon Bearings - 8mm

Specifications:

• Drop-Through Mounting
• Length - 38.4” (97.5 cm) 
• Width - 8.6” (22 cm)
• Wheelbase - 28.25” (71.76 cm)

Comes in 2 Flex Patterns: 

Flex 1: 170 - 250+ lbs | 75 - 115+ kg
Flex 2: 75 - 200+ lbs | 35 - 90+ kg

Construction: Vertically Laminated Bamboo | Fiberglass | Cork | Bamboo Biscuits

Concave: Camber | Radial in the Center | Flares Near Wheel Wells | Small, Functional Nose and Tail

They're Bright Like Our Future

Loaded introduces the V7 Freeride Glove! These have three slide pucks on the fingers, palm, and thumb. All are removal via velcro. Gloves have reflective material over the knuckles for being more easily spotted by cars and your mom.

The wrap strap on the glove makes sure it stays locked and secured on your hand while getting pitted. So pitted.

Shock-Absorbing Poron XRD® Foam Cushion

Under the palm of these gloves is a shock-absorbing Poron XRD® foam cushion. This helps when slamming hands down during falls or hard slides. Note that these are not meant to replace wrist guards, but they do help with impact. Want to live dangerously? Yeah, baby! Remove the pads and live unrestrained.

Ultra High Molecular Weight Pucks

The Ultra High Molecular Weight (UHMW) pucks are super durable even on the worst of pavements. The circular design is comfy around the natural flow of the hand and chamfered to allow for easy finger roll.

Sizing Up Your Hands

• How to Measure: With your palm facing up, measure from the tip of your middle finger to that first wrinkle (never too old to have wrinkles!) across your wrist, just below your hand.
  • Small 7.75" Long, 9.5" Around Width
  • Medium 8.0" Long, 9.75" Around Width
  • Large 8.75" Long, 10.25" Around Width
• Construction: Cordura® / Kevlar® / synthetic suede / Lycra® outer with Poron XRD® palm padding and viscoelastic foam knuckle pad for protection
• Special Features: The most affordable glove from Loaded, the Freeride Slide Glove has your back in the gnarliest of situations.

Dancing in Ecstasy

Tarab is the Arabic word for musical ecstasy. This is literally the essence of Loaded's brand new dancer the Tarab. If you're trying to push the limits of what can be done on a longboard, this is THE board for you.

When street skaters are giving you crap for longboarding, this board shines. With an extremely lightweight construction and extremely poppy tails, you'll be busting out bigspins like the skate gods intended. No longer shall you be ridiculed by street skaters.

This board has the optimal dancing flex pattern, a cork topsheet for dampening, basalt (lava rock from under the sea), vertically laminated bamboo, unique UHMWPE (urethane) rails and polyurethane infused kicktails so you'll never de-laminate your tails, meanwhile adding ridiculous pop.

For your comfort, this board has extreme dampening capabilities to make your ride super smooth. No longer do you have to worry about bumps interrupting your dance lines.

Designed for: 
Cruising | Carving | Pushing | Dancing | Freestyle | Showing Up Street Skaters | Getting Phone Numbers

Complete With:

Complete w/ 80a Stimulus

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Stimulus Wheels - 70mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Complete w/ 86a Stimulus

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Stimulus Wheels - 70mm | 86a | Yellow
• Loaded Jehu v2 Bearings - 8mm

Specifications:

• Truck Mounting - Top Mount
• Length - 47” (119 cm) 
• Width - 9.5” (24 cm)
• Wheelbase - 31.25" - 32.25” (79.4 - 81.9 cm)
• Weight - Flex 1: 5.3 lbs (2.4 kg) | Flex 2: 5 lbs (2.3 kg)

Comes in 2 Flex Patterns: 

Flex 1: 140 - 270+ lbs | 63 - 123+ kg

Flex 2: 80 - 190+ lbs | 36 - 86+ kg

Construction: Vertically Laminated Bamboo | Cork Topsheet | Basalt Core | UHMW Urethane Kicktails | UHMWPE Rails

Concave: Radial | Wheel Flares | Big Kicktails | Concaved Kicktails

Dance, Carve and Whirl Your Stress Away

The Dervish Sama is potentially the most legendary longboard on the planet. It's been out for 10 years now and was Loaded's first venture into drop through mounting. It was the greatest decision they could have made. This board is made to do anything you can throw at it (although, I wouldn't recommend going uncomfortable speeds on it). What are you sitting here reading this for? Pick one up, go outside, spin and whirl around, throw some tiger claws, fat shuv-its, and cruise along the beach. I guarantee your stress levels will go down.

For your comfort, this board is nice and low to the ground for increased stability and ease of pushing due to the drop-through mounting. This board features camber and a moderate amount of flex to reduce the feeling of bumps.

Designed for: 
Cruising | Carving | Pushing | Pumping | Dancing

Complete With:

Complete w/ In Heat:

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Loaded Jehu v2 Bearings - 8mm
• Orangatang In Heat Wheels - 75mm | 80a | Orange

Complete w/ Durian:

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Loaded Jehu v2 Bearings - 8mm
• Orangatang Durian Wheels - 75mm | 83a | Purple

Specifications:

• Drop-Through Mounting
• Length - 42.8" | 109 cm
• Width - 9" | 22.9 cm
• Wheelbase - 31.5" | 80 cm

Comes in 3 Flex Patterns: 

Flex 1: 170 - 270+ lbs | 75 - 122+ kg
Flex 2: 130 - 210+ lbs | 59 - 95+ kg
Flex 3: 80 - 170+ lbs | 36 - 77+ kg

Construction: Vertically Laminated Bamboo | Fiberglas

Concave: Camber | Radial | Functional Nose and Tail

Loaded Boards assembles all of their drop-through completes with these 1/16" shock pads. It prevents damage to the deck and adds a tiny bit of vibration resistance. This keeps your hardware tigher for longer and gives a smooth, quiet ride.

These drop through pads can also come in handy for topmount setups as a lightweight shim for vibration damping and wedging adjustments.

Includes four (4) drop-through shock pads (enough for one complete skateboard).

Looking for the Basalt Tesseract? 

The masterminds behind Loaded Boards continue to design longboards that can do it all. The insanity just doesn’t stop.

The Tesseract is one of these insane boards that dominates in multiple disciplines and lends itself as a great board to skaters belonging to a wide array of riding styles.

With a W-concave, wheel well flares, and multiple wheelbase options, the Tesseract provides a comfortable platform for your feet no matter what your style is.

Loaded Boards might as well officially change their middle name to “innovative” as, with the Tesseract, they have created the first board with a layer of cork covering the bottom of the deck.

Excellent Design for Freeride and Downhill

With wheel-well flares placed before the kicktails and a W-concave throughout, you have yourself a deck that is going to lock your feet in very well. Not only do the wheel-well flares help keep your feet locked-in when doing some technical slides, they also are great for providing foot awareness on downhill runs. When cutting corners at high speeds, it’s obviously pretty important to know exactly where your feet are on your board. Without ever needing to look down to check, you’ll be able to know exactly where your feet are.

The W-concave is more pronounced in the middle of the board and fades away the closer you get to the trucks. The W-concave is nice for when you are in a tuck, and also help greatly with slides – especially toesides. In addition to the W-concave, a slight rocker throughout the board will also help your feet feel nice and secure when doing slides.

Tricks, Tricks, Tricks

With double kicktails and multiple wheelbase options, you have the option of making your Tesseract a bit more downhill/freeride oriented, trick-oriented, or a combination of both. Move those trucks in the innermost holes and you have yourself a premium freestyle board. (Even with the trucks moved to the furthest wheelbase, you’ll find that you will still have a generous amount of leverage over the tails.)

The kicktails have a ton of pop and a scoop of extra concave at the end. Add this concave to the existing wheel flares and you’ll have a superb locked-in feeling during manuals – most excellent for combo-ing manuals with other tricks. What is also nice about the Terresact, is that with a length of 39” there is still some room to spice up your trick combos with some cross-steps and other dance moves.

Cork Base

In the past, some boards have been designed with cork in the middle (such as the Loaded Bhangra), but never before has been it exposed on the bottom of the deck. The bottom layer of cork helps prevent severe board damage. With more traditionally used wood and fiberglass bottom layers, a scrape or crack can eventually expand throughout the board. Unlike wood and fiberglass, cork is granular, meaning it is made up of little grains. This granular makeup, plus the tough design of cork, will make sure your Tesseract survives through whatever rigorous riding you put it through.

All boards are going to get scraped and beat-up, no doubt about that. However, with a bottom layer made of cork, cracks and scrapes will remain more isolated rather than spreading throughout the board. What is also nice about the cork is that it absorbs vibrations from the road, making your ride feel ultra smooth.

Cantellated, Truncated, (regular) Tesseract... which one should I choose?

Tesseract (the original)

With a nose and a tail, aka "double kicktail", this board can do every trick under the sun while fulfilling your freeride and downhill needs of course.

Cantellated Tesseract

Depending on your style, two kicktails isn't always better than one. With the Cantellated Tesseract you can still do most of the technical slides. Though nollie shuv-its and nose manuals will be a bit tougher, the shorter length and lighter weight will make ollies and flip tricks a bit easier.

Truncated Tesseract

Not really interested in tricks, but still want a downhill/freeride board with the amazing ergonomic platform proven in the Tesseract? Well Loaded was thinking of you when they made the Truncated Tesseract. A board with amazing feel and excellent for technical downhill runs.

Complete:

Standard Complete w/ In Heat

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang In Heat Wheels - 75mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Standard Complete w/ Stimulus

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Stimulus Wheels - 70mm | 86a | Yellow
• Loaded Jehu v2 Bearings - 8mm

Cantellated Complete w/ Kegals

• Paris Savant Trucks - 43° | 180mm | Gun Metal Grey
• Orangatang Kegal Wheels - 80mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Cantellated Complete w/ Stimulus

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Stimulus Wheels - 70mm | 86a | Yellow
• Loaded Jehu v2 Bearings - 8mm

Truncated Complete w/

• Paris Savant Trucks - 43° | 180mm | Gun Metal Grey
• Orangatang Kegal Wheels - 80mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Specifications

• Length: 33" | 36" | 39” (99 cm | 91 cm | 84 cm)
• Width: 9.5” (24 cm)
• Wheelbase: 24.5" - 26” (62.2 cm - 66 cm)
• Concave: Radial, W, Gas Pedals
• Nose / Tail: Yes / Yes (both are 7.25”)
• Rocker / Camber: Slight Rocker, 0.33” / No
• Construction: Fiberglass and bamboo, with a cork bottom
• Special Features: This board is extremely durable due to the cork base.

Find Your Zen, Using Tan Tien

The Loaded Tan Tien was conceived by the minds of freestyle longboarding artisans. This board is constructed with vertically laminated bamboo and comes with a very simple concave.

The concave of this board is almost flat except for the camber in the center and a slight amount of radial concave. This makes it comfortable when riding on rough terrain. The nose and tail of this board are perfectly practical but can also be used for some pretty intense looking maneuvers at the hands of a proper longboard freestyler.

For your comfort, this board is nice and low to the ground for increased stability and ease of pushing due to the drop-through mounting. This board features camber and a moderate amount of flex to reduce the feeling of bumps.

Designed for:
Cruising | Carving | Pushing | Dancing | Freestyle

Complete With:

Complete w/ 80a Stimulus

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Stimulus Wheels - 70mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Complete w/ 86a Stimulus

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Stimulus Wheels - 70mm | 86a | Yellow
• Loaded Jehu v2 Bearings - 8mm

Specifications:

• Truck Mounting - Drop-Through
• Length - 39” (99 cm) 
• Width - 8.75” (22.25 cm)
• Wheelbase - 27” (68.5 cm)

Comes in 3 Flex Patterns: 

Flex 1: 170 - 270+ lbs | 75 - 122+ kg
Flex 2: 130 - 210+ lbs | 59 - 95+ kg
Flex 3: 80 - 170+ lbs | 36 - 77+ kg

Construction: Vertically Laminated Bamboo

Concave: Camber | Radial | Functional Nose and Tail

Loaded Labs, the experimental section of Loaded Boards, presents the Pushin Cushion! Pushin Cushion sticks to your board directly and allows riders to have extra grip and plush comfort.

Specifications

• Length: 40" (100cm)
• Width: 10” (25 cm)
• Thickness: 0.12” (3 mm)
• Weight: 10.2 oz (289 g)
• Material: Poron XRD high-performance viscoelastic damping foam that hardens on impact
• Adhesive: Permanent, fiber-reinforced, low-toxicity 3M VHB (Very High Bond) adhesive

Hokey and Pokey

The Poke is very much like a “shortboard” (regular skateboard, whatever you want to call it), but with a TON more features such as extra concave and wheel well flares. The Poke can do almost any trick you can do on a regular skateboard and much more.

Aggressive Shape, Aggressive Style

The Poke is a board that can allow you to rip like none other. Now, of course you can still do some slides on this board, but the Poke is going to shine the most when you take it the streets. With a bamboo and fiberglass construction and a length of 34”, the Poke is not only strong, but extremely light-weight. Its kicktail gives you an amazing amount of pop. Feel free to grind rails, no-comply off ledges, and ollie to the fullest of your ability. Great for old school tricks too. Do wall plant variations that are so sick, they’ll put Mike Vallely to shame!

Ramps, Ditches, and Banks

The Poke is a great street-style board, but it also excels in the skate parks, ditches, and banks. When set up with some turny 150mm trucks, the Poke is an excellent choice for pumping up and down ramps and banks. The Poke is great for vert tricks as well. With a ton of pop and a super-light construction, you are destined to get as much air as you want.

Urban Commuter

Whether skating through a crowded metropolis, picking up some food at the grocery store, or skating to class, the Loaded Poke is an excellent choice for getting around. The Poke is a great choice for pedestrian slalom. The generous kicktail allows you to turn on a dime if needed and is also great for hopping off or ollieing over curbs. At 34”, the Poke is also easy to carry around once you make it to your destination.

Complete With:

• Paris V2 Trucks - 150mm | Raw
• Orangatang Stimulus Wheels - 70mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Specifications

• Length: 34"
• Width: 9.125”
• Wheelbase: 20.75”
• Concave: .5"
• Nose / Tail: Yes, 5.625” / Yes, 7.625”
• Rocker / Camber: Slight rocker of .1"/ No
• Construction: Bamboo and Fiberglass
• Special Features: Versatility. How many boards can ollie stairs AND pump around town?

The Final Evolution of the Pintail

The Loaded Fattail is the final and best rendition of the classic pintail longboard. This thing has a little bit extra girth to give you more standing room and 3 different flexes to fit any size homosapien.

This thing is all about the person controlling it. In the right hands, you can absolutely shred. It's made of the classic Loaded Vertically laminated bamboo and fiberglass construction to make it virtually indestructible and comes with a fat tail to help you do some fat shuv-its and graceful hand tricks.

Still not sold? Just watch our good friend Ari shred some gnar on this puppy.

For your comfort, the fiberglass and bamboo construction of this board dampens road vibrations and ensures that your board will be durable as all hell.

Designed for: 
Cruising | Getting Jiggy | Light Downhill | Light Freeride | Technical Madness | Ari Chamasmany

Complete With:

• Paris V2 Trucks - 150mm | Raw
• Orangatang Stimulus Wheels - 70mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Specifications:

• Truck Mounting - Top Mount
• Length - 38" | 96.5cm
• Width -  8.63" | 22cm
• Wheelbase -  26.5" to 27.4" | 67.3cm to 69.6cm 

Comes in 3 Flex Patterns: 

Flex 1: 170 - 270+ lbs | 75 - 122+ kg
Flex 2: 125 - 215 lbs | 55 - 95 kg
Flex 3: 75 - 175 lbs | 35 - 80 kg

Construction: Vertically Laminated Bamboo | Fiberglass

Concave: Wheel Cutouts | Big Ol' Kicktail | Small Nose | Radial Concave | Camber

DAAAAAAANCE THE NIGHT AWAY!

DON'T FORGET TO WATCH THE VIDEO BELOW. ANYTHING WE SAY ABOUT THIS BOARD DOES NOT DO A JUSTICE. The lovely, legendary Adam Colton explains this board perfectly without words.

The Loaded Bhangra is and always has been the industry standard for dancer longboards. The build quality is top notch (vertically laminated bamboo, cork and bio-resin). The concave is extremely comfortable (slight radial and fat kicktails). There is a stupid amount of pop. The flex is just so darn comfortable (when you pick the right flex for your weight). I literally cannot think of a single con for this board. Just pick one up already. There's no point in waiting.

For your comfort, this board has a beautiful flex pattern and cork in-between the bamboo to make sure you don't feel the bumps you run over.

Designed for:

Dancing | Cruising | Pushing | Freestyle

Complete With:

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Stimulus Wheels - 70mm | 80a or 86a | Orange or Yellow
• Loaded Jehu v2 Bearings - 8mm

Specifications:

• Truck Mounting - Top Mount
• Length - 48.5" | 123 cm
• Width - 9.5” | 24 cm
• Wheelbase - 32.5” | 82.5 cm

Comes in 2 Flex Patterns: 

Flex 1: 150 - 250+ lbs | 68 - 115+ kg
Flex 2: 90 - 190+ lbs | 41 - 86+ kg

Construction: Vertically Laminated Bamboo | Cork In-Between Bamboo Plies | Bio-Resin

Concave: Radial | Giant Kicktails | Asymmetrical 

What do you get when you cut a Kanthaka? A Kut-thaka! Which apparently is pretty offensive in some languages (don't shoot the messenger). This board is a chop of the Loaded Kanthaka, which announces the discontinuation of the Kanthaka with a limited edition Kut-thaka. 

We have four of these delicious completes for you to choose from! Pick whichever best fits your riding style. All builds come with Loaded Flush Mount Allen Hardware, Loaded Jehu Built-In Bearings, and love. 

Carver Trucks

This Kut-thanka comes with silver Carver CX.4 / C2.4 Trucks equipped with Orangatang Nipple Bushings. Get this board for the ultimate surfy feel. Wheels are the super grippy Orangatang 4President in 80a (orange). 

Paris TKP w/ Skiffs 83a

This Kut-thanka comes with silver Paris Traditional Kingpin Trucks (street trucks) and stock bushings. The Skiffs in 83a are great for those looking for a blend of cruising and park tricks. Skiffs in 83a are purple. 

Paris TKP w/ Skiffs 86a

This Kut-thanka comes with silver Paris Traditional Kingpin Trucks (street trucks) and stock bushings. The Skiffs in 86a are great for those looking for a blend of cruising and park tricks, but with more lean towards park tricks. Skiffs in 86a are yellow. 

Paris RKP w/ Stimulus 83a

This Kut-thanka comes with black Paris Reverse Kingpin Trucks (longboard style trucks) and stock bushings. The Stimulus 83a (purple) are a great blend of sliding and some grip. This board is the ultimate back ally slasher and campus commuter. 

Specifications

• Length: 30.75” / 78.1 cm
• Width: 8.375" / 21.3 cm
• Wheelbase (inner hole): 17.5” / 44.5 cm
• Weight (deck only): 3 lbs / 1.36 kg

The Vanguard is the original longboard from Loaded Boards. Own a piece of history with the Loaded Vanguard, the board that launched Loaded into an incredible industry leader.

The symmetrical shape allows for a balanced platform and all around riding. Weighting and un-weighting the deck through turns allows the board to flex and store energy. This energy is then released when the turn is completed, creating a truly one of a kind experience.

You could say this board is "loaded" with potential energy.

Board Construction

The Loaded Vanguard is made from bamboo and fiberglass, creating an incredibly strong and resilient skateboard deck.

The deck contains epoxy and tri-axle fiberglass that sandwich a vertically laminated bamboo core. This is then pressed together under intense strain to form the concave and convex cambers. The liveliness and responsiveness paired with the high energy potential make this deck unbelievably fun.

Choosing a Flex Pattern

First, we recommend deciding whether you want the 42" or 38" model. The 42" is more of a cruiser, while the 38" is more maneuverable and quick.

After deciding on a length, match your weight to the flex chart below. If you are in between flexes, we recommend going stiffer if you want a more stable ride and softer if you want a more maneuverable and lively ride.

Additionally, if you want to do tricks on your Vanguard, you should probably choose a stiffer flex as the stiffness aids in landings and board pop-ability.

Flex Ratings

Loaded offers five flexes integrated within two lengths for a highly personalized ride.

Speed and Downhill

We recommend keeping speeds under 25 mph on the Vanguard. The flexiness of this deck that makes it so much fun to carve also makes it very twitchy with speed. This board was designed for carving pleasure, not speed!

Vanguard Complete In Heat built with:

• Complete In Heat
• Paris V2 Trucks - 50° | 180mm | Black
• Orangatang In Heat Wheels - 75mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Vanguard Complete Durian built with:

• Complete Durian
• Paris V2 Trucks - 50° | 180mm | Black
• Orangatang Durian Wheels - 75mm | 83a | Purple
• Loaded Jehu v2 Bearings - 8mm

Graphic Inspiration

The first Vanguard was designed by Alex Liki of Sao Paulo, Brazil for the Vanguard Graphic Contest. The graphic was then reworked by Pablo and Diana of Nana Studios.

It is meant to encompass the flow and lively feel of the Vanguard.

Specifications

• Length: 38" (Flex 3, 4, and 5) or 42" (Flex 1 and 2)
• Width: 8.5"
• Wheelbase: 31.50" or 35.00" (depending on length)
• Concave: Mild
• Nose / Tail: No / No
• Rocker / Camber: No / Yes
• Construction: Bamboo / Epoxy / Fiberglass
• Special Features: Five (5) flex ratings for full custom ride

"Everything in moderation, including moderation." - Oscar Wilde

The Overland is potentially the greatest middle of the road board you could choose. If you're 100% uncertain what board you want, you should 100% get the Overland.

It's EXTREMELY lightweight, has a slight amount of flex (not enough to throw you off at high speeds); comfortable, moderate radial concave, a directional shape, two fat kicktails, wheel flares, the skills to pay the bills and it'll even do your laundry for you (maybe not). Stop debating and get on one already. Watch the video below, it'll explain everything without explaining anything.

For your comfort, the fiberglass and bamboo construction of this board dampens impacts after big ollies and dampens the feeling of rough pavement.

Designed for:
Street | Park | Freestyle | Downhill | Freeride | Fast Freeride

Complete With:

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Kilmer Wheels - 69mm | 83a | Purple
• Loaded Jehu v2 Bearings - 8mm

Specifications:

• Truck Mounting - Top Mount
• Length - 37” (94 cm)
• Width - 9.5” (24 cm)
• Wheelbase - 20.75” - 22” (52.5 - 56 cm)

Construction: Vertically Laminated Bamboo | Fiberglass Top and Bottom | Graphic - Urethane Snowboard Topsheet Material

Concave: Wheel Flares | Foot Pockets | Big Kicktails | Radial

A balance between the Freeride and the Race Glove, the Advanced Freeride Glove from Loaded is made from a durable goat leather so you can slide along with protection on your hands. Loaded doubles up the leather in the spots you're going to need it the most. Large velcro pads provide maximum velcro adhesion.

Ultra High Molecular Weight Pucks

The Ultra High Molecular Weight (UHMW) pucks are super durable even on the worst of pavements. The circular design is comfy around the natural flow of the hand and chamfered to allow for easy finger roll.

Reflexive Edging

Make sure other riders and cars see you with the durable and super reflective edging. These especially come in handy for those low light evening sessions.

Coolmax® Wicking Fabric

Keep those hands cool and moisture free with Coolmax® wicking fabric. This specialty fabric pulls moisture away from your hand, keeping you dry and less smelly. Ventilation along the gloves also provides exceptional airflow for keeping cool when you're riding hot.

Sizing Up Your Hands

• How to Measure: With your palm facing up, measure from the tip of your middle finger to that first wrinkle (never too old to have wrinkles!) across your wrist, just below your hand.
  • Small/Medium: 7.5" Long, 4.25" Wide
  • Large/Extra Large: 8.5" Long, 4.5" Wide
• Construction: Goat Leather
• Special Features: Goat Leather construction with Ultra High Molecular Weight Pucks makes for a super durable glove.

Your Most Skillful and Able Steed

The Loaded Kanthaka was built to do anything and everything that you could possibly want. Take your old street deck, make it larger, stiffer and more comfortable and you have the Kanthaka. It's everything you could want in a double kick. Blunt slides, 360s, grinds, fat shuv-its, and giant ollies will be a breeze. It comes in two widths, 8.625" and 8.875" to cater to all riders.

Don't you worry about razor-tail or de-lamination, this baby is constructed out of vertically laminated bamboo, fiberglass and has carbon fiber reinforced tails, so you can be sure it'll last you a loooooooong time.

For your comfort, the fiberglass and bamboo construction of this board dampens impacts after big ollies and dampens the feeling of rough pavement.

Designed for:
Street | Park | Freestyle | Light Downhill | Freeride | Techslide

Complete With:

Complete w/ Skiff

• Paris Street Trucks - 149mm | Silver | 8.625 or 8.875
• Orangatang Skiff Wheels - 62mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Complete w/ Onsen

• Paris Street Trucks - 149mm | Silver | 8.625 or 8.875
• Orangatang Onsen Wheels - 58mm | 100a | Light Blue
• Loaded Jehu v2 Bearings - 8mm

Specifications:

• Truck Mounting - Top Mount
• Length - 36” (91.5 cm)
• Width - 8.625” (22 cm) | 8.875” (22.5 cm)
• Wheelbase - 17.5” (44.5 cm)

Construction: Vertically Laminated Bamboo | Triaxial Fiberglass | Carbon Fiber Reinforced Tails

Concave: Wheel Flares | Foot Pockets | Giant 7.5" Kicktails | Radial

The Chubby Unicorn by Loaded Boards will go down as one of the most legendary longboards of our generation. A bold statement, but one we firmly believe to be true. We were hearing about the rumors of Loaded’s first downhill board for years. Its delay was due to the constant improvements the Loaded crew made to the prototype deck. They would not release the board until they could make a board as perfect as possible; an unprecedented board in which there is no comparison. With years of testing and adjustments, the Chubby Unicorn was born. Like Unicorns, the Chubby Unicorn is both magical and mystical and will change the way you skate.

A Downhill Dream

Where to start? Well there is no question that Loaded has perfected the seamless addition of W-concave, rocker, and wheel flares in one deck. With a wide W-concave running through the middle of the deck, your feet are going to have a great locked in feeling when your feet are facing forward when in a tuck. The smooth rocker and recessed truck mounts, on the other hand, lowers the board, which adds stability.

The wheel flares are great for foot awareness. When blazing down hills, you don’t have time to look down to check your foot placement. You need to keep your eyes in front of you! With perfectly placed wheel flares, you’ll know where your feet are at all times and will be able to make foot adjustments without giving it a second thought. Less time thinking about your form and more time thinking about going fast!

The Chubby Unicorn features two sets of CNC’d grab rails on the bottom of the board. The outer grab rails prove to be super helpful for pre-drifts. The grab rails also make the Chubby Unicorn slightly less chubby by reducing the weight of the board

Freeride Heaven

Freeriding on a Chubby Unicorn is like skating on clouds. The Chubby Unicorn features an excellent amount of rocker, not too much, but just enough to cradle your feet nicely. The rocker is great when doing slides. Pull off stand-up slides, colemans and pendys , and some more technical slides without fear of your feet sliding.

The Chubby Unicorn also features recessed truck mounts. This mean the board is actually indented where the truck baseplates are mounted. This lowers your board to the ground. Being lower to the ground makes sliding easier and more comfortable (and also makes pushing easier).

Freestylin’

With a length of just over 42”, the Chubby Unicorn has plenty of room to be used as a dancing board. Let the ergonomically designed rocker guide you as move up and down board doing cross-steps, peter pans, and whatever other new dances you whippersnappers are doing nowadays.

Lots of testing was done to make sure that, at its size, the Chubby Unicorn, would have tails with plenty of leverage and pop. The symmetrical tails are 7” long and narrower than the rest of the board, making shuvits, ollies, g-turns, flip tricks, and manuals much more manageable.

Those grab rails aren’t just for pre-drifts either. The inner grab rails are great for grabbing on to when doing early grabs. Your fingers will appreciate the extra comfort room when early-grabbing over curbs and you’ll have an excellent grip on the board if launching off kicker ramps is more of your style

One of a kind construction

We already mentioned several unique construction characteristics in the Chubby Unicorn: the wide W-concave, kicktails with tons of pop, recessed truck mounts, CNC’d grab rails, just the right amount of rocker. But there are more unique, and even unprecedented, features that make the Chubby Unicorn one of most legendary longboards we have ever seen.

Ultra-high-molecular-weight (UHMW) polyethylene is currently the most commonly used material in slide pucks. It is well liked due to its sliding characteristics, durability, and lightweight. So why not put it on the bottom of a deck? That’s exactly what Loaded did with the Chubby Unicorn. The UHMW bottom layer makes the board more durable against abrasion and moisture damage (this DOESN’T mean it can be used a surfboard!) and even dampens vibrations from the road, make your ride even smoother. Who doesn’t want that?

Another truly one-of-a-kind feature in Chubby Unicorn is its urethane sidewalls. The entire perimeter of the Chubby Unicorn is fortified with healthy dose of Loaded’s Orangatang urethane. That’s right, the same urethane used to make their much-loved Orangatang wheels, just in a slightly higher durometer. The urethane perimeter dampens road vibrations and also makes the board much more durable. The urethane also reinforces the strength of the tail. Lastly, the urethane perimeter adds a protective layer that will absorb impact much better than wood in case you make a boo boo and your board goes flying away from you and into a curb

Recommended Trucks and Wheels

• Trucks: 180mm trucks. Lower degree baseplate if you want a bit less turn and more stability, higher degree if you want quicker turning.
• Wheels: 65mm-75mm. Keep in mind that large wheels may need additional risers for wheel clearance.

Specifications

• Length: 42.25”
• Width: 9.75”
• Wheelbase: 28.25”
• Concave: W-concave
• Nose / Tail: Yes / Yes both are symmetrical and measure to be 7" long.
• Rocker / Camber: Yes / No
• Construction: Basswood, UMHW polyethylene, Orangatang Urethane, and fiberglass
• Special Features: You could write a book on the special features of this board... Urethane sidewalls, UHMW base layer, CNC'd grab rails and wheel well flares, recessed truck mounts. The list goes on and on.

KILL HILLS, SLAY LINES, SHRED GNAR

The Legendary Chubby Unicorn is back, black, red and angry. His girl was stolen and it's time for his vengeance. He's strong, he's fast and he's beefy.

He was made to slay every hill, every skateboarding discipline and impress the ladies (or dudes if you're a lady or that's your style).

**We hope you read the above in Hulk Hogan's voice.**

For your comfort, THIS BOARD WASN'T MADE TO BE COMFY, IT'S MADE STRICTLY TO SHRED EVERYTHING. (In all seriousness, it's super comfortable, the concave is absolutely gorgeous and the kicktails are the perfect size for dancing, ollies, shuv-its, kickflips, bluntslides, etc.)

Designed for: 
DOWNHILL | FREERIDE | FAST FREERIDE | FASTER FREERIDE | DANCING | PARK | FREESTYLE | KILLING THE COMPETITION

Complete With:

Option 1

• Paris Savant Trucks - 50° | 180mm | Red
• Orangatang In Heat Wheels - 75mm | 80a | Orange
• Loaded Jehu v2 Bearings - 8mm

Option 2

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Stimulus Wheels - 70mm | 86a | Yellow
• Loaded Jehu v2 Bearings - 8mm

Specifications:

• Truck Mounting - Top Mount
• Length - 42.25” | 107.3 cm
• Width - 9.75” | 24.8 cm
• Wheelbase - 28.25” | 71.8 cm
• Kicktail Length - 7" | 17.9 cm

Construction: Triaxial E-Glass and Epoxy | Urethane Rails | Vertically Laminated Basswood | More Triaxial E-Glass and Epoxy | UHMW (Ultra High Molecular Weight Polythylene)

Concave: Radial | Wheel Flares | Rocker | W-Concave | Giant Kicktails | Flush Truck Mounts

EXCEL IN ALL CONDITIONS - FROM CRUST TO FLUFF

Built by boarders for boarders, the Algernon is the first snowboard from skateboard maker Loaded Boards. The board is built from custom Loaded Bamboo core that runs tip to tail and edge to edge. No sidewalls eliminate weight and allows for a consistent flex and snap. Edge to edge feel is reliable and snappy. 

Bamboo construction is the perfect combo of dampening and responsiveness. This makes for a buttery and lively ride. Vibration is reduced further via the strategically placed bamboo dampeners (they also look rad). 

The shape is directional, yet twin between the widest points. The nose is slightly longer for powder. Camber is that of a mustache. Edges are hand sharpened and de-tuned with One Ball Jay Bio-Wax. 

Extra binding positions allow for a setback stance, ideal for powder days. Mid-binding positions make the Algernon more geared towards park riding. This board is a true all around shred sled. 

For your comfort, Loaded offers a limited lifetime warranty on every skateboard and snowboard they produce. 

Designed for: 
All Mountain | Park | Powder

Specifications:

• Shape - Directional Twin
• Flex - Twin
• Length - 150 / 154 / 157 / 160w 
• Width - 9.65” (24.5 cm)
• Wheelbase - 27” (68.5 cm)

Construction: 100% Vertically Laminated Bamboo Core with Cork Footbeds | Sintered UHMW Base | Edges are Full Wrap Stainless Steel

Camber: Mustache Camber Profile

*Specs in centimeters with the exception of the sidecut radius (in meters).

The masterminds behind Loaded Boards continue to design longboards that can do it all. The insanity just doesn’t stop.

The Tesseract is one of these insane boards that dominates in multiple disciplines and lends itself as a great board to skaters belonging to a wide array of riding styles.

With a W-concave, wheel well flares, and multiple wheelbase options, the Tesseract provides a comfortable platform for your feet no matter what your style is.

Loaded Boards might as well officially change their middle name to “innovative” as, with the Tesseract, they have created the first board with a layer of cork covering the bottom of the deck.

Excellent Design for Freeride and Downhill

With wheel-well flares placed before the kicktails and a W-concave throughout, you have yourself a deck that is going to lock your feet in very well. Not only do the wheel-well flares help keep your feet locked-in when doing some technical slides, they also are great for providing foot awareness on downhill runs. When cutting corners at high speeds, it’s obviously pretty important to know exactly where your feet are on your board. Without ever needing to look down to check, you’ll be able to know exactly where your feet are.

The W-concave is more pronounced in the middle of the board and fades away the closer you get to the trucks. The W-concave is nice for when you are in a tuck, and also help greatly with slides – especially toesides. In addition to the W-concave, a slight rocker throughout the board will also help your feet feel nice and secure when doing slides.

Tricks, Tricks, Tricks

With double kicktails and multiple wheelbase options, you have the option of making your Tesseract a bit more downhill/freeride oriented, trick-oriented, or a combination of both. Move those trucks in the innermost holes and you have yourself a premium freestyle board. (Even with the trucks moved to the furthest wheelbase, you’ll find that you will still have a generous amount of leverage over the tails.)

The kicktails have a ton of pop and a scoop of extra concave at the end. Add this concave to the existing wheel flares and you’ll have a superb locked-in feeling during manuals – most excellent for combo-ing manuals with other tricks. What is also nice about the Terresact, is that with a length of 39” there is still some room to spice up your trick combos with some cross-steps and other dance moves.

Cork Base

In the past, some boards have been designed with cork in the middle (such as the Loaded Bhangra), but never before has been it exposed on the bottom of the deck. The bottom layer of cork helps prevent severe board damage. With more traditionally used wood and fiberglass bottom layers, a scrape or crack can eventually expand throughout the board. Unlike wood and fiberglass, cork is granular, meaning it is made up of little grains. This granular makeup, plus the tough design of cork, will make sure your Tesseract survives through whatever rigorous riding you put it through.

All boards are going to get scraped and beat-up, no doubt about that. However, with a bottom layer made of cork, cracks and scrapes will remain more isolated rather than spreading throughout the board. What is also nice about the cork is that it absorbs vibrations from the road, making your ride feel ultra smooth.

Complete With:

Complete w/ In Heat 80a:

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Loaded Jehu v2 Bearings - 8mm
• Orangatang In Heat Wheels - 75mm | 80a | Orange

Specifications

• Length: 39” (99 cm)
• Width: 9.5” (24 cm)
• Wheelbase: 24.5" - 26” (62.2 cm - 66 cm)
• Concave: Radial, W, Gas Pedals
• Nose / Tail: Yes / Yes (both are 7.25”)
• Rocker / Camber: Slight Rocker, 0.33” / No
• Construction: Basalt fabric, fiberglass and bamboo with a cork base
• Special Features: This board is extremely durable due to the cork base.