Skateboarding Grinds [A Rad Guide]

Skateboarding grinds are one of the most iconic tricks in skateboarding. They look amazing, and they're a lot of fun to do. There are many different types of grinds, and each one has its own unique challenges.

[Have you tried the Onewheel yet?]

17 Best Skateboarding Grinds

1. Ollie to 50-50 - This is one of the most basic skateboarding grinds out there, but it's still a great move to know. To perform this grind, simply ollie onto your skateboard and then land in a 50-50 position. You can either jump into the grind or drop down into it.

2. 50-50 to Fakie - This is a variation of the previous grind. To do this one, start in a 50-50 position and then simply ride backwards while still grinding on the rails or ledge.

3. 5-0 to Smith - Start by performing a 5-0 grind on a rail or ledge. Once you're comfortable in that position, start to lower your back foot down into a Smith position. This is a great grind to know if you want to transition into other more difficult moves.

4. 5-0 to Feeble - Another variation of the 5-0 grind, this time transitioning into a Feeble position. To do this, simply lower your front foot down to the middle of your deck while keeping your back foot in place. You'll be balancing on the truck bolts of your skateboard in order to pull off this move.

5. 50-50 to Crooked - Start by getting into a 50-50 grind position and then simply lean to one side or the other, lifting your inside leg up in the air. You can go for either a regular Crooked grind or a Feeble Crooked grind by also lowering your front foot down to the middle of your deck.

6. Boardslide - A boardslide is a great skateboarding grind to know and it's not too difficult to learn. To do this move, approach a rail or ledge at an angle and then ollie up onto it. Once you're in position, simply ride down the length of the object while grinding on it.

7. Nosegrind - The nosegrind is another classic skateboarding grind that looks impressive and isn't too hard to learn. To do this one, start by rolling up to a rail or ledge and then ollie onto it, landing with your front foot in the middle of your deck and your back foot hanging off the nose. From there, simply grind down the length of the object.

8. Noseslide - The noseslide is a variation of the boardslide and it's another great move to know. To do this one, approach a rail or ledge at an angle and then ollie up onto it. Once you're in position, slide down the length of the object on your nose instead of grinding on it.

9. Tailslide - The tailslide is similar to the noseslide but instead of sliding on your nose, you'll be sliding on your tail. This is a slightly more difficult move to learn but it's still a great one to know. To do a tailslide, approach a rail or ledge at an angle and then ollie up onto it. Once you're in position, slide down the length of the object on your tail.

10. Frontside Boardslide - The frontside boardslide is another variation of the boardslide and it's a great move to know. To do this one, approach a rail or ledge at an angle and then ollie up onto it. Once you're in position, simply ride down the length of the object while grinding on it with your front foot in front of your back foot.

11. Backside Boardslide - The backside boardslide is another variation of the boardslide and it's a great move to know. To do this one, approach a rail or ledge at an angle and then ollie up onto it. Once you're in position, simply ride down the length of the object while grinding on it with your back foot in front of your front foot.

12. Feeble Grind - The feeble grind is a great skateboarding grind to know and it's not too difficult to learn. To do this move, approach a rail or ledge and then ollie up onto it. Once you're in position, lower your front foot down to the middle of your deck and then start grinding down the length of the object.

13. Smith Grind - The Smith grind is another classic skateboarding grind that looks impressive and isn't too hard to learn. To do this move, approach a rail or ledge and then ollie up onto it. Once you're in position, lower your back foot down to the middle of your deck and then start grinding down the length of the object.

14. Feeble to 50-50 - The feeble to 50-50 is a great transition move to know and it's not too difficult to learn. To do this one, start by getting into a feeble grind position on a rail or ledge. Once you're comfortable there, simply raise your front foot up and over the top of your deck into a 50-50 position. From there, you can continue grinding down the length of the object.

15. 50-50 to Feeble - The 50-50 to feeble is another great transition move to know and it's not too difficult to learn. To do this one, start by getting into a 50-50 grind position on a rail or ledge. Once you're comfortable there, simply lower your front foot down into a feeble grind position. From there, you can continue grinding down the length of the object.

16. Noseblunt Slide - The noseblunt slide is another great skateboarding grind to know and it's not too difficult to learn. To do this move, approach a rail or ledge at an angle and then ollie up onto it. Once you're in position, lower your front foot down to the middle of your deck and then start grinding down the length of the object. As you're grinding, make sure to keep your nose blunt (i.e. not touching the ground) for the duration of the move.

17. Crooked Grind - The crooked grind is another great skateboarding grind to know and it's not too difficult to learn. To do this move, approach a rail or ledge at an angle and then ollie up onto it. Once you're in position, lower your back foot down to the middle of your deck and then start grinding down the length of the object. As you're grinding, make sure to keep your body crooked (i.e. not straight) for the duration of the move.

[Try to avoid these skateboard injuries.]

What are grinds in skateboarding?

Grinds are a type of skateboarding trick where the skateboarder slides along an obstacle, such as a rail or ledge, using the trucks of the skateboard. The term can also refer to the act of sliding on any surface other than the ground (e.g., grinding on a handrail).

What is the easiest grind in skateboarding?

The answer to this question depends on a number of factors, including your skill level and the type of skateboarding you're interested in. For those just starting out, the easiest grind might be the Ollie, which is simply jumping into the air and landing on your board's trucks.

More experienced skateboarders might find that nose grinds or 50-50s are easier, while those looking for a challenge might try difficult tricks like nollies or switchstance 50-50s. Ultimately, there is no single answer to this question - it all comes down to what you're most comfortable with and what you're trying to achieve.

What is the hardest skateboard grind?

There are a few different ways to measure the "hardest" skateboard grind. One method is to simply ask professional skateboarders which tricks they think are the most difficult to execute. Another way to measure the hardness of a skateboard grind is to look at the level of skill required to perform the trick. For example, a very difficult skateboard grind might be one that requires a high degree of balance and coordination, or one that is very physically demanding.

The backside noseblunt is widely considered the most difficult skateboarding trick to master. This is due to the fact that it requires a high level of precision and balance in order to execute properly.

There are many different ways to perform a backside noseblunt, but the most common method is to approach the coping (edge) of the pool or ramp with speed and then ollie (jump) into the air while turning your board 180 degrees so that it lands nose-first on the coping. From there, you must quickly revert your body weight back onto your rear foot in order to keep your balance and land safely.

As you can see, the backside noseblunt is not for the faint of heart. It takes a great deal of skill and practice to master this challenging trick. But once you've landed it, you'll be able to boast that you can do one of the most difficult skateboarding tricks in the world.

[Here is how to ride a scooter.]

Why is it called a 50/50 grind?

The 50/50 grind is so named because of the way the skateboard deck is positioned on the rails. The front truck is positioned in the center of the deck, and the back truck is positioned half-way between the front truck and the tail. This gives the deck a very balanced feel, making it ideal for doing tricks and transitions. The 50/50 grind is also one of the easiest grinds to learn, which makes it a popular choice for beginner and intermediate skateboarders alike.

What are grinds in skateboarding?

Most skateboarders know that grinds are one of the most essential tricks in the book. But what exactly are they?

Grinds involve sliding your board along a surface, using your trucks as the point of contact. This can be done on ledges, rails, curbs, and just about anything else you can think of.

There are many different types of grinds, each with its own unique name and set of variations. The most common grinds include the 50-50, boardslide, lipslide, and FS 5-0.

Each type of grind has its own set of challenges and rewards. For example, 50-50s are relatively easy to learn but can be difficult to master. Boardslides, on the other hand, are more difficult to learn but offer a greater sense of satisfaction when you finally nail one.

No matter what type of grind you're trying to learn, practice makes perfect. The more you do it, the better you'll get.

[How good are you at vert skating?]

Do I need to learn skateboarding grinds?

Grinding is a skating technique that involves sliding your board along a surface while maintaining contact with the ground. The most common surface to grind on is a railing or ledge, but you can also grind on stairs, curbs, and other objects.

There are two main types of grinds: Lip grinds and 50-50 grinds. Lip grinds involve sliding your board across the top of a rail or ledge, while 50-50 grinds involve sliding your board down the middle of a rail or ledge.

Lip grinds are the most common type of grind, and they're easiest on the side of a ledge. To do a lip grind, you need to approach the rail or ledge with speed and pop your board up onto the surface. As you slide across the surface, keep your weight balanced and your feet firmly planted on your board.

50-50 grinds are a bit more difficult than lip grinds, but they're still relatively easy to do. 50-50 grinds involve sliding your board down the middle of a rail or ledge. To do a 50-50 grind, you need to approach the rail or ledge at an angle and pop your board up onto the surface. As you slide down the rail or ledge, keep your weight balanced and your feet firmly planted on your board.

Grinding is a great way to improve your balance and coordination, and it's also a lot of fun. There are many different types of grinds, so experiment and find the ones that you like best.

What is the hardest grind in skateboarding?

The backside noseblunt is widely considered the most difficult skateboarding trick to master. This is due to the fact that it requires a high level of precision and balance in order to execute properly.

There are many different ways to perform a backside noseblunt, but the most common method is to approach the coping (edge) of the pool or ramp with speed and then ollie (jump) into the air while turning your board 180 degrees so that it lands nose-first on the coping. From there, you must quickly revert your body weight back onto your rear foot in order to keep your balance and land safely.

As you can see, the backside noseblunt is not for the faint of heart. It takes a great deal of skill and practice to master this challenging trick. But once you've landed it, you'll be able to boast that you can do one of the most difficult skateboarding tricks in the world.

[Have you gone to the best surfing cities?]

Are 50/50 grinds easy?

This is a tough question to answer, as it really depends on your skill level and how comfortable you are with your board. For beginners, 50/50s can be quite difficult and may take some time to perfect. However, once you get the hang of them, they can be fairly easy to do. It's all about finding your balance and making sure your trucks are properly aligned.

[Here are some of the best ski resorts in US territory.]

Other factors to consider

There are a number of other tricks and grinds we couldn’t list in this guide. However, you may want to check them out, so they are listed below.

• kickflip

• heelflip

• nose manual

• salad grind

• primo grind

• overcrook

• bluntslide

• darkslide

• kickturn

• frontside 180

• suski grind

• willy grind

If you’re a novice skater, you owe a debt of gratitude to Rodney Mullen, as he invented most flatground tricks. Skateparks also let you do grind tricks, vert tricks, and even let you do tricks on flat bars.

Make sure you have great grip tape, and follow the right tutorials on YouTube. Soon after, you’ll be doing grinds like a pro.