Step on bindings are a type of binding that is attached to the bottom of your snowboard that allow you to "step on" and attach your boots to your board. This method skips the traditional ratchet straps, which can be a bit of an annoyance.
This can make getting in and out of your equipment much easier and faster, especially if you want to bust some sick one-footers. So without further ado, let’s dive deep into the world of Step On bindings. 🏂 ⛄️
[Check out the totally rad Ayumu Hirano.]
What Are Step On Bindings?
Step On bindings are a method of attaching snowboard boots to a snowboard simply by stepping into the binding. It is somewhat similar to the way ski boots click into their bindings, though don't expect them to release like ski boots if you eat it!
|On / Off Ease
|Medium - Stiff
|Soft - Stiff
|Soft - Stiff
There two main types of "step" bindings - Step On and Step In.
Step On refers to the boot itself being able to snap into the binding. The bindings do not have straps, all the support comes from the boot itself. At the time of this writing, Burton has a patent on this design and makes the best variation of this design (boot design and binding design).
There are a few things to keep in mind when using Burton Step On bindings. First, they are not going to work with your existing boots. Step On for Burton is a bundle deal. You have to get their bindings and boots at the same time as they need each other like peanut butter needs jelly. If you've got a brand of boots that are near and dear to your heart, this could be a deal breaker.
Traditional bindings have boots + bindings + straps. Each movement you do pulls through the straps and makes the board react. Step On bindings are more of a direct connection. They have clips that lock into the binding. This can make for a more responsive feel.
Step In refers to a binding that releases the high back and allows the boot to insert from the rear of the straps. Typically you adjust the straps one time and then step in and out of the binding.
CLEW makes a binding that is a bit of a hybrid of both, though we would classify it as a Step In.
Overall, step on bindings can be a great option for those who want an easier and faster way to get in and out of their snowboard.
Step On Burton Bindings
- Why it's rad: The OG step ons, Burton makes a durable and super responsive binding option.
- Buy at Amazon
Step On Burton Photon
- Why it's rad: Burton makes some solid boots in general and Step Ons are no different. They own the patent on this particular model.
- Buy at Amazon
Who Makes Step On Bindings?
There are a few different companies that make step on / step in bindings, but the most popular ones are Burton (boots and bindings) and Nidecker (backed by Flow - bindings). Both of these brands have patented bindings that are designed specifically for fast in and out boot release.
When it comes to choosing step on bindings, it's important to consider what type of riding you'll be doing most often. If you're mostly going to be riding in the park, then you'll want bindings that offer a soft flex. On the other hand, if you're mostly going to be riding powder, then you'll want bindings that offer more stiffness and stability. Step On boots / bindings are going to be in the medium to stiff boot variety. Ultimately, it's up to you to decide what type of bindings will work best for your needs.
If you're looking for the best step on bindings, then you'll want to check out the selection from Burton. These two brands offer a great variety of bindings that are sure to meet your needs, no matter what type of riding you're planning on doing.
Are Step On Bindings Good?
There are a lot of different opinions out there about step on bindings, and whether or not they are any good. So, what is the verdict? Are step on bindings good?
The answer really depends on who you ask. Some people absolutely love their step on bindings and find them to be extremely convenient and easy to use. Others find that they are not as secure as traditional bindings and can be more difficult to use. Ultimately, it comes down to personal preference and what you are looking for in a binding.
If you are looking for a binding that is quick and easy to get on and off, then step on bindings could be a great option for you. However, if you value security and safety above all else, then you might want to stick with traditional bindings. Whichever route you choose, make sure that you do your research and pick a binding that is right for you.
Are Step On Bindings Good For Beginners?
If you're just getting started in snowboarding, step on bindings do simplify all the things you need to be thinking about when going riding.
Unfortunately, there's no easy answer to this question. It really depends on your own personal preferences and skiing style. Some beginner snowboarders find that step on bindings are a great way to get used to the sport, while others find them more difficult to use.
If you're interested in trying out step on bindings, it's best to talk to an experienced snowboarder or ski shop employee who can help you make the right decision for your needs.
Can You Put Step On Bindings On Any Board?
The answer is yes, you can put step on bindings on any board. The process is simple and only requires a few tools. With the right know how, you can install bindings on any board in no time.
First, you'll need to gather your materials. You'll need the binding, a screwdriver, measuring tape, and any tools specific to your binding (allen keys, etc). Make sure to choose a binding that's the right size for your boot. Once you have your materials, it's time to get started.
Align the binding with the binding screw locations on the deck. You want the bindings to be far enough apart for just about a shoulder width stance. Depending on your type of riding, you can mount the bindings centered or slightly towards the tail of the snowboard. We recommend centered for the best all around feel.
Add about a 15 degree toe out for the best comfort. You can adjust this later as you see fit. Also you can adjust your front foot and rear foot separately if you prefer.
And that's it! With these simple steps, you can put bindings on any board.
Do Step On Bindings Fall Off?
There's nothing more frustrating than having your bindings come undone while you're riding. But don't worry, it's not just you. This is a common problem that happens to almost everyone at some point. The good news is that there are a few things you can do to prevent it from happening.
First, make sure that your bindings are properly tightened. And we're not just talking about the ratchet strap. You also have to make sure the screw holding the binding strap to the binding is good and snug. Use loctite to make sure the screw stays there. If they're loose, they're more likely to come undone.
Second, avoid stepping on your loose binding straps. This can damage them and cause them to come off.
With these tips in mind, you should be able to keep your bindings from coming undone. So go out and shred with confidence!
[Check out all these rad flavors of Mountain Dew.]
Is There A Weight Limit For Step On Bindings?
Typically no, any binding is strong enough to handle any rider.
There are different sized bindings depending on your boot size though. Make sure you order the binding size that best fits your size boot. Going too big or too small is going to cause you issues.
What Are The Benefits Of Step On Bindings?
There are many benefits of using step on bindings for snowboarding. Perhaps the most obvious benefit is that they allow you to easily get in and out of your bindings without having to fumble with straps. When you get good, you may even be able to do it without sitting on the snow or on a bench. This can save a lot of time, particularly if you're hitting the slopes the first time for that fresh pow run.
Finally, step on bindings can provide a more comfortable ride. Without traditional straps or laces, you won't have to worry about them digging into your legs or feet. If the boot is comfortable, it should also be comfortable when riding since you are not adding any additional tension. This can make a big difference if you're snowboarding hard for extended periods of time.
If you're looking for a convenient and comfortable way to hit the slopes, step on bindings are definitely worth considering.
[See these rad wheels from Orangatang.]
What Size Shoe Are Step On Bindings Good For?
There is no definitive answer to this question as it depends on a number of factors, such as the specific bindings you are using and your personal preferences. However, in general, step on bindings are designed to be used with shoes that are size 8 or larger. So if you are wondering what size shoe you should use with your step on bindings, start with a size 8 and go from there.
Do Step On Bindings Have An Effect On Your Board?
The simple answer is yes, step on bindings can have an effect on your board. However, it really depends on the type of binding and how often you use them. For example, if you have a bindings that are designed for all-mountain riding, they will be more durable and able to withstand more abuse than those that are meant for freestyle riding.
Also, if you only use your bindings occasionally, they will likely last longer than if you were using them every day. Ultimately, it is important to read the product descriptions carefully and choose the right bindings for your needs.
Why Are Step On Bindings Popular?
There are a few key reasons why step on bindings have become so popular in recent years. For one, they offer a high level of convenience and ease of use. Step on bindings eliminate the need to fiddle with straps or laces, making it quick and easy to get in and out of your snowboard boots. This is especially helpful for those who are constantly getting in and out of their boots throughout the day, such as when taking breaks or riding up lifts.
Another reason step on bindings are becoming more popular is that they offer a more secure connection between boot and binding. This means that you're less likely to experience any slipping or sliding while riding, which can be extremely dangerous. Additionally, many newer step on bindings feature additional safety features, such as toe and heel caps, that further reduce the risk of injury.
Overall, step on bindings offer a number of advantages that make them an appealing option for many snowboarders. If you're looking for a convenient, easy-to-use binding that will keep you secure while riding, then step on bindings are definitely worth considering.
How Well Do Step On Bindings Work?
There is no doubt that Step On bindings are the future of snowboarding. They offer a unique combination of convenience and performance that is unrivaled by any other binding system on the market. But how well do they actually work?
In short, Step On bindings work extremely well. The vast majority of riders who have tried them report excellent results, with many saying that they outperform traditional strap bindings in both comfort and performance. There are a few minor complaints here and there, but overall, the feedback is overwhelmingly positive.
If you're thinking about making the switch to Step On bindings, rest assured that you're making a decision that is almost certainly going to improve your snowboarding experience.
Do Professionals Use Step On Bindings?
There is some debate among snowboarders as to whether or not step on bindings are appropriate for use by professionals. Some believe that these bindings offer an advantage in terms of ease of use and convenience, while others argue that they can be less reliable and durable than traditional strap bindings.
Ultimately, the decision of whether or not to use step on bindings is up to the individual rider.
Other Factors To Consider
Skiers and snowboarders both need to be aware of bindings - whether they are step-in bindings, snowboard bindings, or Burton Step On bindings. Sites like Backcountry sell sick snowboard gear, as well as useful gift cards.
Women’s bindings are also important, and there are other options too, like flex snowboard bindings, strapless bindings, toe cleats, regular bindings, ski boots - and so much more. If you’re getting a new snowboard, you should definitely look at snowboard bindings reviews, as well.
You should also look at the following sick winter gear:
The Bottom Line For Step On Bindings
We hope you liked this in-depth guide - we had a blast writing it. Whether you want Photon Step On bindings, Burton Ruler Step On Bindings, highback bindings, K2 Clicker bindings, or something else entirely - we’ve got you covered.
If you like snowboarding, odds are, you might also like to skate. Be sure to check out some of our other rad guides, covering skating, and so much more.