Stylish and Functional

The Vacay Skateboard Backpack is a 29.9 Liter backpack with extreme functionality. This thing features numerous different backpacks and sleeves for whatever you may need on your skate trip.

Features:

• Large main compartment and front organizer pocket.
• Internal 15 inch laptop sleeve.
• Skateboard straps.
• Adjustable mesh shoulder straps.
• Brand label at front pocket.
• Self fabric side pockets.

Dimensions: 18 inches x 11.75 inches x 7 inches

Dragon Bearings are from the minds of the skateboarders at Stoked and Fireball. They wanted a bearing to last long and have tried and tested bearing technology behind it. The result is Dragon Bearings. 

Dragon Bearings have two kinds of lubricants, RACE and ENDURE.

• RACE is a light oil that allows the freest spinning bearing and the highest speed.
• ENDURE uses a light grease that promotes bearing longevity. This more viscous lubricant fights washout when riding in water.

Skateboard bearings are always plagued with dirt and grime, so Dragons come standard with labyrinth seals to keep out unwanted particles. These seals keep lubricant in and dirt out, leading to a longer bearing life.

Beast Guarantee - All Fireball products also come with the standard Beast Guarantee which promises 25% off worn out or destroyed products. No questions asked.

Specifications

• Axle Size (ID): 8mm
• ABEC Rating: Skate Rated
• Lubrication: RACE (light oil) or ENDURE (light grease)
• Comes with Spacers: No
• Comes with Speed Rings: No
• Special Features: Two lubricants allow for all types of riding styles.

MAKE DOWNHILL GREAT AGAIN

Jee willakers there are a lot of options in downhill wheels. Just make it easy on yourself and go with the 4Presidents. The aim of this wheel is to "MAKE DOWNHILL GREAT AGAIN". These things are friggin fun. Not too wide, not too narrow, not so big that you'll get wheelbite, not so grippy that you can't freeride. These things are 70mm tall, 56mm wide, and made of happy thane for your corner gripping needs.

Just cast your vote already. Oragantang 4President - 2020.

For your comfort, these wheels the best middle ground so that you can skate anything and everything. Fun is the best word to describe them.

Designed for: 
Downhill | Freeride | Fast Freeride | Cruising | Pumping | Carving | Pushing

Specifications:

• Diameter: 70mm
• Width: 56mm
• Contact Patch: 56mm
• Durometer: 80a | 83a | 86a 
• Lip Profile: Sharp
• Core Placement: Offset
• Contact Patch Surface: Smooth, Unbroken-in Skin

Comes in 3 Colors:

80a - Orange | 83a - Purple | 86 - Yellow

Get Pumped to Get Pumping

The Loaded Icarus was designed with your comfort in mind. It is composed of vertically laminated bamboo, cork and bamboo biscuits strategically placed to increase torsional rigidity. What you give to this board you get right back out of it.

This board was optimized for the maximum amount of energy transfer to the trucks. In layman's terms, carve and pump real hard and you'll gain speed.

For your comfort, this board is nice and low to the ground for increased stability and ease of pushing due to the drop-through mounting. This board features camber and a moderate amount of flex to reduce the feeling of bumps.

Designed for:
Cruising | Carving | Pushing | Pumping | Dancing

Complete With:

Complete w/ Kegels

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Kegel Wheels - 80mm | 80a | Orange
• Orangatang Nipple Bushings - 85a | Orange
• Dragon Bearings - 8mm

Complete w/ Durians

• Paris V2 Trucks - 50° | 180mm | Matte Black
• Orangatang Durian Wheels - 75mm | 83a | Purple
• Dragon Bearings - 8mm

Specifications:

• Drop-Through Mounting
• Length - 38.4” (97.5 cm) 
• Width - 8.6” (22 cm)
• Wheelbase - 28.25” (71.76 cm)

Comes in 2 Flex Patterns: 

Flex 1: 170 - 250+ lbs | 75 - 115+ kg
Flex 2: 75 - 200+ lbs | 35 - 90+ kg

Construction: Vertically Laminated Bamboo | Fiberglass | Cork | Bamboo Biscuits

Concave: Camber | Radial in the Center | Flares Near Wheel Wells | Small, Functional Nose and Tail

If it ain’t broke, don’t fix it! Ever since its introduction in 1975, Bennett Trucks have been awesome. The Bennett Trucks of today are virtually identical to the first Bennett Trucks produced about 40 years ago. These were the trucks of choice for many of the original, legendary skaters from the 70s who paved the way for the expansion of skateboarding and longboarding.

When searching for trucks with a lot turn and carving capabilities, it just doesn’t get any better than the Bennett Vector!

Turn, Turn, and Turn Some More!

The Bennett Vector is so unique that it is a bit hard to describe its feel in words, but for those who have had the pleasure of riding Bennett Vectors know that this truck dives and turns harder than just about any other truck out there. This is mainly due to its tall height and the openness of the bushing seat. The Bennett Vector is best suited with a tall .750 bushing on the bottom and small .550 on top. Anything much smaller than .750 on bottom will most likely need an extra washer or two to provide you with extra height. All bushing shapes work with the Bennett Vector.

The Bennett Vector is most commonly used by carving and Long Distance Pumping/Pushing (LDP) enthusiasts. With the right bushing setup, Bennett Vectors really allow you to “dig” into your turns. For pumping-related skating, the Bennett Vector is very commonly paired with a Tracker RT-S, with the Bennett as the front truck and the Tracker as the rear. With the right bushings and wedging, the Bennett and Tracker pair can keep you pumping for miles! In its smallest size – the 4.3 – the Bennett Vector also makes for a good beginner front slalom truck.

The Cinnett Baseplate by Cindrich

Also, don’t forget that STOKED is the only skate shop that sells Cindrich baseplates specifically made for Bennett trucks – the Cinnett Baseplate. The Cinette Baseplate is a precision baseplate and provides a perfect fit for your Bennett hanger. It is available in different angles and comes with a grade 8 kingpin which can be easily removed if needed. The Cinnett Baseplate is highly recommended for serious LDP riders!

Specifications

• Width: 152mm
• Bushing Type and Durometer: Bennett Barrel bushings, 90a
• Ride Height: 66mm
• Axle Size: 8mm
• Rake: No
• Baseplate Degree(s): 10 degrees
• Kingpin Style: Traditional Kingpin (TKP)
• Special Features: The Bennett Vector’s one-of-a-kind design provides unmatched turning and carving capabilities.

Snowboard Inspired Cruiser

The Arbor Axis is one of the most popular boards from Arbor. The drop through deck design paired with perfect symmetry make this board super comfortable when commuting and cruising. 

Graphics on the Arbor Boards are awesome and designed in house by Arbor. The Bamboo features art by artist Hannes Hummel. The Artist features work from Florian Schommer. 

This board was made of recycled wood and eco-friendly, water based, sanding sealers.

For your comfort, this board has a classic shape in a more compact form. 

Designed for: 
Pushing | Cruising | Commuting

Complete With:

• Paris Trucks - 180mm | 50° | Silver or Black
• Arbor Outlook Wheels - 70mm | 78a
• Standard Abec 5 Bearings
• Jessup or Lucid Grip, a clear spray-on grip made from crushed recycled glass

Specifications:

• Truck Mounting - Drop Through
• Length - 37" | 40” (94 cm | 101.5 cm) 
• Width - 8.5" | 8.8” (21.5 cm | 22.5 cm)
• Wheelbase - 27.4" | 30.5” (69.5 cm | 77.5 cm)

Construction: 8 Ply Maple

Construction (Bamboo): 7 Ply Maple + 1 Ply Bamboo

Concave: Radial 

EXCEL IN ALL CONDITIONS - FROM CRUST TO FLUFF

Built by boarders for boarders, the Algernon is the first snowboard from skateboard maker Loaded Boards. The board is built from custom Loaded Bamboo core that runs tip to tail and edge to edge. No sidewalls eliminate weight and allows for a consistent flex and snap. Edge to edge feel is reliable and snappy. 

Bamboo construction is the perfect combo of dampening and responsiveness. This makes for a buttery and lively ride. Vibration is reduced further via the strategically placed bamboo dampeners (they also look rad). 

The shape is directional, yet twin between the widest points. The nose is slightly longer for powder. Camber is that of a mustache. Edges are hand sharpened and de-tuned with One Ball Jay Bio-Wax. 

Extra binding positions allow for a setback stance, ideal for powder days. Mid-binding positions make the Algernon more geared towards park riding. This board is a true all around shred sled. 

For your comfort, Loaded offers a limited lifetime warranty on every skateboard and snowboard they produce. 

Designed for: 
All Mountain | Park | Powder

Specifications:

• Shape - Directional Twin
• Flex - Twin
• Length - 150 / 154 / 157 / 160w 
• Width - 9.65” (24.5 cm)
• Wheelbase - 27” (68.5 cm)

Construction: 100% Vertically Laminated Bamboo Core with Cork Footbeds | Sintered UHMW Base | Edges are Full Wrap Stainless Steel

Camber: Mustache Camber Profile

*Specs in centimeters with the exception of the sidecut radius (in meters).

Suspendisse a ridiculus molestie scelerisque a lacinia rhoncus a vitae faucibus nunc suscipit eros urna ridiculus ut quisque interdum a blandit ullamcorper nullam dui etiam convallis. Scelerisque class sed consectetur enim hac metus leo nullam quisque himenaeos habitant parturient nascetur himenaeos aliquet est. Augue suscipit cras vestibulum a mus vestibulum a ullamcorper montes suspendisse a purus aliquet pulvinar. Est amet in in metus parturient parturient felis a ullamcorper condimentum cursus et vestibulum scelerisque scelerisque torquent vestibulum ad vehicula mi nascetur ridiculus etiam. Velit vestibulum class condimentum rutrum a vulputate scelerisque cum himenaeos ad magna parturient mus quis condimentum quis.